Image
Image

Car Immobiliser - CAN-PHANTOM

Whatsapp Image 2024 11 15 At 6.14.40 Pm Removebg Preview

Guaranteed Protection

The CAN-PHANTOM protects from key-cloning, relay theft, key theft, hot-wiring and more.

UK Based

The CAN-PHANTOM has been designed, developed and manufactured in the UK.

Approved Installers

All of our installers are approved and trained by CAN-PHANTOM LTD HQ

CAN-PHANTOM Immobiliser Supplied & Fitted from £399

Ba4f2416 165b 11ee 976e 0242ac110007 1920w

If you are looking for an advanced, UK based aftermarket CAN bus immobiliser for your vehicle, that prevents theft of your pride and joy, the CAN-PHANTOM is your solution. The CAN-PHANTOM immobiliser is new and advanced technology that is revolutionising the car security industry.

The CAN-PHANTOM is designed and developed by our in-house engineers at CAN-PHANTOM Limited and is manufactured in Wales. The product was designed in-house and is continuously being maintained and further developed by our engineers.

Our security system prevents the car’s engine from starting until you have entered your PIN code. The device is retrofitted to the vehicle. This is carried out by one of our approved and qualified installers.

Following installation, you will be able to set your own personal code using any of the supported electrical switches in the vehicle. This cost effective security device is value for money and will give you peace of mind. Fit our vehicle immobiliser, keep your car secure.

The Remap Link - Non Detectable
Immobiliser - CAN-Phantom

The CAN-PHANTOM is a unique, next generation device that secures your vehicle without the need for cutting wires* or adding after-market key fobs. The device is connected to the vehicles CAN data network and a personalised PIN code is programmed into the Phantom using buttons on the dash and steering wheel.

 

Engine Start Blocking

The CAN-PHANTOM will prevent the starting of the engine unless the unique, user defined PIN code has been entered first.

Undetectable via OBD

A modern thief can use diagnostics to detect circuit cuts on modern vehicles. The CAN-PHANTOM has no circuit cuts so it cannot be found using these methods.

No Radio Signals

Thieves cannot use sophisticated RF scanning, code grabbing technology to detect what security device your vehicle has when it does not transmit any signals like conventional security systems.

Advantage of CAN

The use of the CAN data bus has several advantages including low risk during installation, low probability of detection, and allows for placement almost anywhere in the vehicle

Silent Operation

Because the unit communicates with the ECU on the data bus to immobilise the vehicle there is no way a thief could listen for the tell-tale clicking of a traditional immobiliser relay.

Stop Key/ECU Cloning

A thief cannot simply add a new key or replace an ECU to bypass the CAN-PHANTOM and start the vehicle. Only a correct PIN code will allow the engine to start.

Individually Tested Cars

Due to the nature of the data bus communication the CAN-PHANTOM has been adapted and tested for every vehicle we list as compatible. If we list your vehicle you can be sure we have thoroughly tested its operation with the CAN-PHANTOM.

Weatherproof Device

The CAN-PHANTOM is sealed and so small it can be installed and wrapped into the vehicle harness anywhere in the vehicle making it near impossible for a thief to find.

Emergency PIN Code

If the PIN code is forgotten, the car is sold or a button is broken there is a secure, unique reset code for each device.

Valet Mode

Valet mode allows your vehicle to temporarily start and drive without requiring the PIN code. The CAN-PHANTOM will exit service mode based on speed and time or by simply entering the PIN code.

Simply Change Pin Code

At any time you can easily change the PIN code. Only you will know the unique PIN code for your vehicle.

Use Vehicle Button as Pin

The buttons in modern vehicles send data all around the vehicle which allows us to detect many different keys being pressed without extra wiring.